Marc René Schädler
1f189ca402
add wlanwatchdog crontab entry to tplink boards
2013-09-09 11:07:25 +00:00
Marc René Schädler
c306813c26
add execution of environment variables script to rc.local
2013-09-09 11:07:16 +00:00
Tim Niemeyer
78e3d51531
bsp/*: remove ath9k-watchdog
...
This also fixes missing mii/eth-tool on wr841n8.
Signed-off-by: Tim Niemeyer <tim@fipux.org>
2013-09-09 11:06:52 +00:00
Tim Niemeyer
d41a1bd919
bsp/*: add ethtool and mii-tool
...
Signed-off-by: Tim Niemeyer <tim@fipux.org>
2013-07-13 23:18:59 +00:00
Tim Niemeyer
9beaf017a1
Enable atk9k-watchdog
2013-04-01 16:29:16 +02:00
Tim Niemeyer
dcee86e97c
All: Disable 802.11b wifi
...
The new ODFM modulation is much better and the old one isn't really
used these days.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
2013-04-01 16:29:16 +02:00
Tim Niemeyer
192dd3765c
Change BATMAN ethernet ports
...
BATMAN couldn't handle devices with the same MAC, so this uses the internal
switch to bridge the ports. It also changes the MAC to a localy unique
address.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
2013-03-30 00:10:52 +01:00
Bjoern Franke
0dd9c6076a
remove ath9k-watchdog, backport ath9k-patches from openwrt r35786, should fix many dDMA issues
2013-02-27 19:28:07 +01:00
Bjoern Franke
59304a1224
- moved ath9k-watchdog to default
...
- watchdog bites now in case of 'Failed to stop TX' instead of 'Could not stop RX'
- instead of reboot, reset wifi and add enable batman-adv on wifi again
2013-02-24 09:33:55 +01:00
Bjoern Franke
5c9ca26d4f
ALL ath9k: add ath9k-watchdog script
2013-02-17 11:24:35 +01:00
Bjoern Franke
e839e70c11
ALL ath9k: enable atht9k-watchdog
2013-02-17 11:23:11 +01:00
Bjoern Franke
8b2be541e6
wr741nd* / wr841nd7: enable syslog/logread (needed for ath9k-watchdog)
2013-02-17 01:00:32 +01:00
Tim Niemeyer
d6d2fdb773
All: add ethernet ports to batman
...
This should fix #469
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
2013-02-16 16:00:06 +01:00
Tim Niemeyer
d1bcab12b6
rc.local [all devices] optimize mac correction
...
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
2013-02-03 18:01:27 +01:00
Tim Niemeyer
8fcff99fde
WR741V2: changes based on AA branch
...
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
2013-02-02 01:01:54 +01:00
Bjoern Franke
31b3c3715c
fixed essid, Oldenburg is not Franken
2012-12-31 17:57:17 +01:00
Tim Niemeyer
bdb4bdb967
LEDs: Most of the LEDs on tplinks are set by uci-default
...
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
2012-11-18 23:49:30 +01:00
Tim Niemeyer
d1226f0e3c
LEDs: Enable heartbeat status leds
...
This enables heartbeat (blinking depending on the load).
DIR300: The little triangle/circle led
wr741: The sun
wr1043: SYS
Fonera: Power (only on 2200; seems to be hard-wired on 2100)
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
2012-11-18 21:49:02 +01:00
Tim Niemeyer
138915a5b5
LEDs: enable netdev and heartbeat on all platforms
...
This should fix #425 and gives further possibilities to enable
heartbeat on unused leds.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
2012-11-17 23:07:51 +01:00
Tim Niemeyer
eb60e1cd3f
vpn: remove tincd
...
fastd is well tested and so we can safely remove tincd and his big
openssl dependency.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
2012-11-17 21:10:58 +01:00
Tim Niemeyer
5fbf402168
This adds support for the wr741nd V2
...
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
2012-10-24 22:15:14 +02:00